The SP Sump Slurry Pump is designed for coal preparation, chemical handling, minerals processing ,sand and gravel and general tank, pit or hole-in-ground slurry applications. The cantilever design makes the SP Sump Pump ideally suited for heavy continuous handling of abrasive, coarse grained particle and corrosive liquids and slurries while submerged in sumps .They can also work normally under intermittent feeding. The wet parts are designed with hard metal, so offer you reliability and long wear life.
Product Feature
1.Vertical, centrifugal and single casing structure.
2.The Impeller is double suction half-open structure, is made of wear-resistant alloy.
3.No submerged bearings or packing.
4.Available in various standard lengths to suit common sump depths, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump.
5.Three type construction of the pump inlet: standard type with strainer, suction pipe with strainer,with agitator.
6.Direct drive, V-belt drive could be selected to connect with the drive.