Home > Products > Vertical Centrifugal Slurry Pump > SPR Sump Slurry Pump > 65QVL-SPR Lengthening Sump Slurry Rubber Pump

65QVL-SPR Lengthening Sump Slurry Rubber Pump

    Payment Type: L/C,T/T
    Incoterm: FOB
    Min. Order: 1 Set/Sets
    Delivery Time: 30 Days

Basic Info

Model No.: 65QVL-SPR

Impeller Number: Single-Stage Pump

Working Pressure: Middle Pressure Pump

Influent Type of Impeller: Double-Suction Pump

Position of Pump Shaft: Vertical Pump

Pump Casing Combined: Horizontal Split Pumps

Mounting Height: Suction Centrifugal

Impeller: Semi-Open

Usage: Pump

The Material For Wet Parts: A3+Rubber

Size: 65mm

Speed: 700~1500r/min

Allowable Mating MAX. Power: 30KW

Impeller Diameter: 280mm

Pump Weight: 317kg

Capacity: 22.5~105m3/h

Head: 5.5~30.5m

Max. Efficency: 52%

Additional Info

Brand: Soarho

Transportation: Ocean

Place of Origin: Shijiazhuang

Supply Ability: 10 Set/Month

Port: Tianjin In China

Product Description

65QVL-SPR Lengthening Sump Slurry Rubber Pump

Product Introduction

65QVL-SPR is Single Casing Sump Slurry Pump.It is vertical, Centrifugal Slurry Pump submerged in water to work. The pump belongs to extended SPR Sump Slurry Pump,which can be applied to the condition of deep liquid level.All parts of the pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle corrosive slurry. The Pump needn't shaft sealing or sealing water.It is able to operate normally under condition of insufficient suction volume.

65QVL-SPR sump Slurry Pump is widely applied to sewage treatment ,metallurgy, mining, coal, power plant, building materials industries and so on.

Lengthen Sump Slurry Pump



1 Shaft

2 Cylindrical roller bearing

3 Bearing housing

4 Bearing spacer

5 Double row center conical roller bearing

6 Mounting plate

7 Column support

8 Strainer

9 Rear liner

10 Impeller

11 Pump casing

12 Lower strainer

13 Discharge pipe

14 Flushing pipe

15 Coupling part

16 Middle supporting part










Product Feature

  1. Vertical, centrifugal and Single-casing structure.
  2. The Impeller is double suction half-open structure, adopts wear-resistant alloy or rubber.
  3. The bearing assembly is cylinder type structure, the bearing could be lubricated by grease.
  4. The clearance between the impeller and the cover plate could be adjusted to ensure the pump to operate at high efficiency point.
  5. Needn`t shaft sealing or sealing water.
  6. Direct drive, V-belt drive could be selected to connect with the drive.
  7. The lengthened series of long shaft sump slurry pump can be applied to the condition of deep liquid level. This kind of pump has added guide bearing structure on the basis of standard pump, which makes the operation more stable and applies more widely. However, the bearing should be equipped with flush water.

Rubber Lined Pump

Range of Performance

Capacity 22.5~105m3/h

Head 5.5~30.5m

Discharge diameter: 65mm

Drive Type

SP Series Sump Slurry Pump

Type Of Pump Inlet Construction

SP Series Sump Slurry Pump

Outline Drawing

65mm Size Lenthening Sump Rubber Pump


Looking for ideal 65mm Size Lenthening Sump Rubber Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Lenthening Sump Rubber Pump are quality guaranteed. We are China Origin Factory of Rubber Lined Pump. If you have any question, please feel free to contact us.

Product Categories : Vertical Centrifugal Slurry Pump > SPR Sump Slurry Pump

Product Images

  • 65QVL-SPR Lengthening Sump Slurry Rubber Pump
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liujianxin Mr. Liujianxin
What can I do for you?
Contact Supplier