Home > Products > Sand / Dredge Pump > WN Series Dredge Slurry Pumps > 700WNQ Underwater Dredging Pump

700WNQ Underwater Dredging Pump

    Payment Type: L/C,T/T
    Incoterm: FOB
    Min. Order: 1 Set/Sets
    Delivery Time: 60 Days


Basic Info

Model No.: 700WNQ

Impeller Number: Single-Stage Pump

Working Pressure: Middle Pressure Pump

Influent Type of Impeller: Single Suction Pump

Position of Pump Shaft: Horizontal Pump

Pump Casing Combined: Verticaljoint Surface Pump

Mounting Height: Suction Centrifugal

Impeller: Closed

Usage: Pump

NPSHr: <6

Suction Diameter: 760mm

Head: 16~28m

Size: 700mm

Discharge Diameter: 700mm

MAX. Diameter Of Flowed Particle: 280mm

Speed: 240~280r/min

Efficient: 80~84%

Capacity: 8000~12500m3/h

Pump Weight: 21000kg

Additional Info

Brand: Soarho

Transportation: Ocean

Place of Origin: Shijiazhuang

Supply Ability: 10 Set/Month

Port: Tianjin In China

Product Description

700WNQ Underwater Dredging Pump

Product Introduction

700WNQ dredging pump is 700mm size horizental Centrifugal Slurry Pump.The structure of the pump is single stage, single suction, and centerline suction.These series Submersible Slurry Dredging Pumps adopt single pump casing structure,in order to reduce the pump weight, easy to lift and move.The pump is installed on a special underwater frame on the side of the ship, which can be directly connected with the submerged motor,also can be connected with the ship's motor or electormotor through the long shaft.According to the connecting way of gear box can provide two kinds of typical structures, one is connected with own bearing bracket, the other is combined with reduction gear box. The submerge Slurry Pump can meet the requirement of working in single pump and two pumps in series.The pump can realize the variable-speed performance at multi working condition points with the fine self-priming, wear resistance, smooth operation, low noise and convenience for overhaul and hoisting. It is equipped with the self-supply seal water system with sand filter and lubricating system and has a long service life and durability.
700WNQ is suitable for dredging and filling operations of cutter-suction dredger and trailing suction dredger. It is also used for river sand mining and mining vessels.

• Product Feature

Marine Underwater Dredging Pump

Combined with gear box structure

1 Gear box

2 Impeller release collar

3 Seal assembly

4 Adaptor plate

5 Rear plate liner

6 Frame plate

7 Cover plate

8 Throat bushing

9 Impeller

10 Supporting plate

Underwater Dredging Pump

With own bearing bracket structure

1 Shaft

2 Support

3 Impeller release collar

4 Seal assembly

5 Adaptor plate

6 Rear plate liner

7 Frame plate

8 Cover plate

9 Throat bushing

10 Impeller

11 Supporting plate

1.The structure is simple and reliable.

The Sand Suction Dredge Pump adopts single pump casing structure,in order to reduce the pump weight, easy to lift and move.According to the connecting way of gear box can provide two kinds of typical structures, one is connected with own bearing bracket, the other is combined with reduction gear box. The lubrication of pump with bearing bracket is grease lubrication or thin oil lubrication.

2. Easy to assemble and disassemble and easy to maintain. The front dismantling structure is adopted, and special disassembly tools are equipped to facilitate disassembly and assembly.

3.The performance of dredging is excellent. The flow and head curve of the pump are steep, the suction ability is strong, the ability of passing the pump is good, the change of the distance is more applicable, and the depth of digging and the higher transportation concentration can be reached.

4.Good wear resistance and long life of flow Wear Parts. The impeller, volute liner, throat bushing and rear plate liner (wearable liner) are made of strong wear resistant alloy cast iron whose hardness is not less than 58HRC.It has not only impact on resistance but also high anti-abrasion performance.

5.Using advanced hydraulic model, the pump has low hydraulic loss, high efficiency and low energy consumption. The service life of each part is full considered in the process of product design. The same replacement cycle reduce the maintenance and replacement costs.

6.The shaft seal is reliable and no leakage.

The pump adopts mechanical seals or packing seals or combination of mechanical and packing seals.

Range of Performance

Capacity Q:8000-12500m3/h

Head H:16-28m

Discharge diameter: 700mm

Outline Drawing

See the attachment.

Looking for ideal 700mm Size Underwater Dredging Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Marine Underwater Dredging Pump are quality guaranteed. We are China Origin Factory of Underwater Dredging Pump. If you have any question, please feel free to contact us.

Product Categories : Sand / Dredge Pump > WN Series Dredge Slurry Pumps

Product Images

  • 700WNQ Underwater Dredging Pump
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liujianxin Mr. Liujianxin
What can I do for you?
Contact Supplier